Home > > The Magnetic Material To Build Electric Motor Magnets
The Magnetic Material To Build Electric Motor Magnets 2012-02-28
Lowering or even eliminating their power bill has been on the minds of millions. With the arrival of the magnet motor with Magnetic Material, the time has come when anyone can be energy efficient.
Here are some of the benefits:
1. The energy provided is clean and renewable.
2. Your property value increases with the installation of a magnet motor.
3. For only a couple hundred dollars, the cost of building materials, your house can be run with free energy.
4. It may interest your power company to buy energy from you.
5. The upkeep of this system is minimal.
Electric Motors Magnets are not only affordable, they are effective and can be used by anyone. Many individuals are already learning how to build this amazing system.
1 Set the grill up according to manufacturer's instructions. Fill it up with charcoal and light it using the long lighter. Make sure that the bucket of water is nearby in case the metal needs to be rapidly cooled or a fire needs to be put out. Put on the safety goggles and leather gloves.
2 Place the metal on the grill over the hottest part of the charcoal using the tongs. Let the grill heat up as much as possible. Once it reaches its peak heat, light the torch and apply its flame evenly to the metal. Heat it with the torch for a few minutes. Turn off the flame on the torch when finished.
3 Pick up the hot metal with the tongs. Hold the neodymium magnet in one hand. Stroke the metal bar with it. Always stroke it in the same direction and lift the neodymium magnet well away from it once it reaches the end. Never move the magnet back and forth over the bar, this will ruin the magnetizing process. Keep stroking it as it cools to the ambient temperature. Once it has, it will be a powerful permanent magnet suitable for use in an electric motor.
If you want to know more,please enter the following link:Motor Stack.